Filter
Top Products
e-STUDIO350/352/353/450/452/453
CONTROL PANEL
5
5 - 7
© 2003 - 2008 TOSHIBA TEC CORPORATION All rights reserved
No. Message State of equipment Note
74 Misfeed in copier Paper jam in the equipment
- Displayed when paper jam occurred in the
equipment
Remove the paper in the equipment
according to the messages displayed
on the panel.
75 Call for service Displayed when motor, sensor, switch, etc.
do not work properly
Turn OFF the power and solve the
problem, then turn ON the power.
76 Please try again after
a while
Displayed when the Department Code can
no be keyed in immediately after power-ON.
Leave it for a while and key in the
code again.
77 Set standard size
Displayed when the paper size which is not
acceptable is set (depends on the setting)
Reset the paper size.