Filter
Top Products
How to Set Up Your Computer to Use the Media Center
with a TV Tuner
2
1 Turn off the computer.
2 Connect the provided AV cable from the video/audio
line out jack on the right side of the computer to the
TV’s video/audio connections.
3 Turn on the TV, and then turn on the computer.
4 To send the display signal to the TV, press the
“Instant TV Out” button above the computer’s
keyboard (or press
FN+F5), and then move/toggle to
the TV icon.
This step must be taken before launching the
Media Center or the InterVideo DVD Player
applications.
Connecting the TV Signal Source When You Have an
Existing Setup
This section shows you how to connect the signal source
from the wall to a VCR to a TV using a coaxial cable.
1 Remove the coaxial cable from the VCR input, and
connect it to the input of a coaxial cable signal
splitter (not shipped with your computer or system).
2 Connect two coaxial cables (not shipped with your
computer or system) to the splitter outputs.
3 Connect one of the coaxial cables to the VCR input,
and the other end to the coaxial port on the right side
of the computer.
C1914-1.fm Page 2 Friday, September 19, 2003 1:00 PM