![](http://pdfasset.owneriq.net/d/5a/d5ac7158-c954-4956-8019-718e8037c397/d5ac7158-c954-4956-8019-718e8037c397-bg135.png)
4.26 Sound board 4 Replacement Procedures
TECRA A10/S10/P10/SatellitePro S300 Maintenance Manual (960-684) [CONFIDENTIAL] 4-77
Installing the Sound board
To install the sound board follow the steps below and refer to Figure 4-48.
1. Connect the sound board FFC to the connector CN9630 on the sound board.
2. Set the sound board to the slot and secure it with the following screws.
• M2.5×4B FLAT HEAD screw ×2
3. Stick the glass tape in place.