Toshiba B-EV4D Printer User Manual


 
APPENDIX 1 SPECIFICATIONS ENGLISH VERSION EO1-33088
A1.2 Options
EA1- 3
A1.2 Options
Option Name Type Description
AC Adapter Cover B-EV904-AC-QM-R Attached to the printer bottom for housing the AC
adapter.
Cutter module B-EV204-F-QM-R
B-EV204-P-QM-R
A cutter unit that makes full cuts.
A cutter unit that makes partial cuts.
Strip module B-EV904-H-QM-R When attached to the front of the Media Outlet,
this module allows the on-demand strip issue by
detecting the presence or lack of a label.
External media roll hanger B-EV904-PH-QM-R When this option is attached to the printer, a
media roll with an outer roll diameter up to
203mm (8”) and inner core diameter of 76.2mm
(3”) can be used.
A1.3 Media
Please make sure that the media to be used is approved by TOSHIBA TEC. The warranties do not apply to
problems caused by using media that is not approved by TOSHIBA TEC.
For information regarding TOSHIBA TEC-approved media, please contact a TOSHIBA TEC authorised
representative.
A1.3.1 Media Type
The table below shows the size and shape of the media that can be used on this printer.
N
OTE:
The above options are available from your nearest TOSHIBA TEC representative or TOSHIBA TEC Head Quarters.
e
f
c
d
Feed Direction
Black Mark
(on reverse side)
Tag paper
Cut position
Black Mark
(on reverse side)
c
e
g
d
Label
g
h