Filter
Top Products
3.MAIN UNIT REPLACEMENT
EO18-33016A
3.10 Media Sensor
3-25
13. Replace the Sensor PCB with a new one, and reassemble in the reverse order of removal.
NOTES:
1. Before re-connecting the Sensor Harnesses to the Sensor PCBs, be sure to move the upper and lower
Media Sensors to the left end.
2. After connecting the Sensor Harnesses and when installing the Media Sensor Block on the printer, be sure
to move the upper and lower Media Sensors to the right. Doing this removes slack of the Sensor Harnesses.
Do not move the Media Sensors to the rightmost position, as this may cause the Sensor Harnesses to be
disconnected.
Sensor Harnesses
Media Sensor
Media Sensor