Filter
Top Products
3.MAIN UNIT REPLACEMENT
EO18-33016A
3.11 Top Cover Open Sensor (Right)
3-27
4. Remove the two screws from the Stepping Motor Unit.
5. Loosen the Motor Frame Locating Screw, on the upper left of the printer front.
6. Release the side hooks of the Media Path Frame, and draw it out upward.
7. Remove the two screws to detach the Sensor Frame and release the Ground Wire (Red).
PT-4x12 Screw
PT-4x12 Screw
Ground Wire (Red)
Sensor Frame
Side Hook
SMW-3x6 Screw
SMW-4x8 Screw
Stepping Motor Unit
Media Path Frame
Motor Frame
Locating Scre
w
Do not remove, just loosen!