Filter
Top Products
1. PRODUCT OVERVIEW ENGLISH VERSION EO1-33047
1.4 Appearance
E1- 4
1.4.4 Operation Panel
1.4.5 Interior
Please see Section 3.1 for further information about the Operation Panel.
LCD Message
Display
ON LINE LED
(Green)
ERROR LED
(Red)
[PAUSE] key
[FEED] key
[RESTART] key
WARNING!
1. Do not touch the Print Head
or around it just after
printing. You may get
burned as the Print Head
becomes very hot during
printing.
2. Do not touch any moving
parts. To reduce the risk of
fingers, jewellery, clothing,
etc., being drawn into the
moving parts, be sure to
load the media once the
printer has stopped moving
completely.
3. To avoid injury, be careful
not to trap your fingers
while opening or closing the
cover.
4. The stepping motor will
become very hot after
media is issued
continuously for about 1
hour.
Care must be taken not to
touch it when the front
cover is opened, or you
may get burned.
Ribbon Stoppe
r
(Take-up side)
Ribbon Cove
r
Caution
Label
Print Head
Head Position Lever
Media Guide
Media Holder Ass’y
Platen
Caution symbol for the
print head (Please refer
to WARNING 1)
Supply Path
Label
Caution about the
moving parts
(Please refer to
WARNING 2.)
Head Position
Leve
r
Head Position Label (Refer to
Section 2.3 Loading the
Media, Step 13.)
Caution
Label
Caution about the
cover open/close
(Please refer to
WARNING 3.)
Caution symbol for the stepping
motor (Please refer to WARNING 4.)