Filter
Top Products
4. MAINTENANCE ENGLISH VERSION EO1-33059
4.1 Cleaning
E4- 3
4.1.3 Optional Cutter Module
The swing cutter and rotary cutter are available as an option. They are
both cleaned in the same way. When removing the Cutter Cover of the
rotary cutter unit, remove the screws from the bottom of the cover.
1. Loosen the two screws to remove the Cutter Cover.
2. Remove the Plastic Head Screw to detach the Media Guide.
3. Remove the jammed paper.
4. Clean the Cutter with a soft cloth slightly moistened with alcohol.
5. Reassemble the Cutter Module in the reverse order of removal.
Screw
Media Guide
Swing Cutter
Cutter Unit
Fixed Cutter
Cutter Cover
Plastic Head
Screw
WARNING!
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is
sharp, care should be
taken not to injure
yourself when cleaning.