Filter
Top Products
4 Replacement Procedures 4.6 Keyboard
4.6 Keyboard and RTC battery
Removing Keyboard and RTC battery
Remove the Keyboard and RTC battery according to the following procedures and Figure 4-
8.
1. Release the following 13 latches on the keyboard cover, in that order:
- One latch on right side and one latch on left sides.
- Five bottom latches.
- Six front latches.
2. Remove the keyboard cover.
3. Remove four M2.5x2.5 black flat head screws.
4. Disconnect the keyboard cable from CN250 on the system board.
5. Remove the keyboard.
6. Raise the RTC battery with a plastics stick from the battery locker left hole.
7. Remove RTC battery.
M2 5x2 5 black flat head screw..
CN251
Keyboard
Keyboard cover
Latch
RTC Battery
Figure 4-8 Removing the keyboard
4-20 Satellite/Satellite Pro/C650/C655 Maintenance Manual