Filter
Top Products
4.13 Display Mask 4 Replacement Procedures
4.13 Display Mask
Removing the Display Mask
Disassemble the ODD drive according to the following procedures and Figure 4-23.
1. Peel off four seal tapes and remove four M2.5x5 black flat head screws securing the
display mask.
2. Insert your finger between the edge of display mask and the LCD and remove the
display mask while unlatching the display mask.
M2 5x5 black flat head screw.
Seal
Seal
Display mask
Figure 4-23 Removing the display mask
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-23.
1. Install the display mask and lock the latches.
NOTE: When installing the display mask, ensure there is no gap between the display
mask and the display cover.
2. Secure the display mask with four 2.5x5 black flat head screws and stick four seal tapes.
Satellite/Satellite Pro/C650/C655 Maintenance Manual 4--37