Filter
Top Products
54
Getting Started
Using external display devices
Connecting to a TV using HDMI™-CEC
HDMI™-CEC (Consumer Electronics Control) is a standard in the
CE Industry which allows devices to work together over an HDMI
cable. Toshiba computers with HDMI-CEC include a Toshiba
utility (that may need to be installed) which can allow you to:
❖ Use the TV remote control to output the computer screen onto
the TV screen.
❖ Use the TV remote control to launch, operate and close
applications on your computer.
❖ Turn on the TV when the HDMI output is selected using the
Fn+F5 key.
❖ Switch the video output (HDMI or LCD) when executing
certain desktop icons.
❖ Enable/Disable the HDMI-CEC function on the computer.
For more detailed HDMI-CEC information, visit
pcsupport.toshiba.com.
Directing the display output when you turn on the computer
Once you have connected an external display device, you can
choose to use the internal display only, the external device only, or
both simultaneously.
Some modes are only available with the appropriate device attached
and turned on.
The quickest way to change the display output settings is to use the
display hot key (
Fn + F5):
1 Press
Fn and F5 simultaneously.
2 While holding down
Fn, press F5 repeatedly until the setting
you want takes effect. Briefly pause each time you press the
F5
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
❖ LCD—Built-in display only
❖ LCD + HDMI—Built-in display and TV (or other external
video device) simultaneously
❖ HDMI—TV (or other external video device) only
NOTE