Toshiba E40 - A Series Laptop User Manual


 
Foreign Objects
Never push a foreign object through an opening in the Product. Never allow metal
objects (such as screws, staples, or paper clips) to enter Product. This could
cause a short circuit.
Heat
Keep Product away from radiators, stoves, heat sources or other equipment that
produce heat.
Hot Surfaces
Allow the equipment’s internal components and hot-pluggable drives to cool
before touching them.
Unstable Surfaces
Do not use Product on an unstable table, cart or stand.
Operating Environment
Never expose your Product to excess heat, extremely low temperatures,
sudden temperature variations, or dusty environments. This could cause system
malfunction, loss of data or damage to Product.
Power Cables/Cords and Power Source
Always use power cables/cords and power sources that comply with the voltage
and frequency specications and requirements of the country of use.
Service Provider
Disconnect Product from the electrical outlet and take Product to an authorized
Toshiba service provider if:
• AC adaptor or power cable/cord is damaged.
Liquid has spilled into Product or an object (such as a screw, staple or paper
clip) has entered Product.
Product has been dropped, subject to shock or impact and/or damaged in
some way.
Noticeable signs of overheating, smoke, deformation, cracks, leaks or unusual
odor occur.
Service is needed on component inside compartments requiring opening or
removal of covers.
Thunderstorm
Never operate your Product during a thunderstorm. An electrical surge caused by
the storm may cause system failure, loss of data or hardware damage.
Wireless Functionalities
Turn off your Product and/or all wireless functionalities where electronic devices
are regulated or controlled or when near a person with any medical electric
devices.
Ventilation
Operate your Product on a hard at surface to ensure reliable operation and good
ventilation. Using your Product on a soft surface such as carpet or sofa can block
slots, vents or openings and cause overheating.
Water and moisture
Do not use Product in a wet location. Do not connect/disconnect a power plug/
cord with wet hands.