Filter
Top Products
ENGLISH VERSION EM1-33038D
8. LOADING THE MEDIA
8-4
8. LOADING THE MEDIA
EM1-33039E
8. The media is now loaded and the sensor position is set.
Batch type:
Media
Fig. 8-6
Cutter type: Where a cutter is fitted load the media as standard and feed it through the cutter
module.
NOTES: 1. Be sure to cut the backing paper of label. Cutting label will cause the glue to stick to the
cutter, which may affect the cutter quality and shorten the cutter life.
2. If the top edge of label winds onto the platen in cut issue, set the DIP SW 1-5 to ON.
3. Use of tag paper with the thickness exceeding the specified valve may affect the cutter life.
Fig. 8-7
Media
Media Outlet
Cutter Module