Filter
Top Products
4- 3
EM1-33043D
4. INSTALLING THE PRINTER
2) Fit the media guide into a slot which
corresponds to the width of media to
be used. First insert portion 1 , then
2 until it snaps in position.
4.2 INSTALLING THE MEDIA GUIDE
4.2 INSTALLING THE MEDIA
GUIDE
NOTE: The media guide is not required
for a 55 mm wide label roll.
1) Slide the media cover release catches
and open the media cover.
Fig. 4-3
WARNING!
A cutter is attached to the inside of the
media cover. Care should be take not to
injure your hand with the cutter when
opening the cover.
Media Guide
2
1