Toshiba EO1-11095 Cash Register User Manual


 
6. PROGRAMMING OPERATIONS
EO1-11095
6-16
NOTES: Net to S.I. 1, 2 ........... Refer to the section of PRESET RATE SETTING FOR
SELECTIVE ITEMIZERS near the end of this chapter.
The HI-CONE Status (Code 6) requires setting of the Whole Package
Quantity (Address 8).
Setting Examples:
To set only Status 2 to ON ................ Enter 2 [#]
To set Statuses 2,3,6 to ON.............. Enter 236 [#]
To set none of statuses to ON .......... Enter 0 [#]
6 Tax Status
Enter one-to four-digit Status Codes for applicable Tax.
| | | | | [#]
0: Non-taxable
1: Tax 1 (Tax 1 taxable)
2: Tax 2
3: Tax 3
4: Tax 4
(More than one code can be entered for combining Tax 1 to Tax 4 taxable status. For
example, enter 12 to select Tax 1 and Tax 2 taxable status.)
7 Unit Price of Individual Split Package (for HI-CONE PLUs only)
To preset the unit price of individual split package, enter a maximum of 6-digit price, and
depress [#].
To cancel the unit price of individual split package, enter 0 and depress [#].
(When the unit price of individual split package is not preset (or 0), whole package price
(Address 3 setting) will be used in the registration.
8 Whole Package Quantity (for Split Package Pricing PLUs)
| | | [#]
Enter the whole package quantity in max. 2 digits (1 to 99), or enter 0 to cancel the Split
Package Pricing status. Be sure to set a whole package quantity here for PLUs with HI-
CONE Status (Address 4 -Code 6) or Mix & Match Group No. (Address 13).
NOTE: When the option “Preset Point for one decimal digit” is selected, this setting
is not allowed to any PLUs.
9 PLU Group No. (for purposes of reports)
Enter a 2-digit code (1 to 99) as a PLU Group No. to which the PLU belongs, and
depress [#]. To cancel the Group No. once set, enter 0 and depress [#].
6.8 PLU TABLE PROGRAMMING (Submode 4)
Address No. Description of Programming Contents
-- Continued --
-- Continued on next page --