Filter
Top Products
12. OPERATING PROCEDURES
12.9 SELECTING PRINT ITEM
12-15
12.10 DATE CHANGE
The date can be changed temporarily.
Menu: REG., M.DOWN, or REWRAP
Mode: WEIGH, FIX, or BY COUNT
NOTES: 1. A store code can be printed in place of a “packed on date” and “sell by date” by
changing the initial settings #6-5 and #6-6.
To print a store code, select “packed on date” or “sell by date” as a print item using
the above procedure.
Additionally the print of “packed on time” with alphabetical code can be selected
with Initial setting #6-6.
2. Setting data will not be changed by turning the power off, changing the mode or
calling a PLU.
3. The key has no function.
4. Pressing the key allows you to return to the step of selecting the “packed on
date”.
5. The range of idle time=0 to 99 seconds. A setting “0” prohibits display of an auto
message.
6. Item 29 is operable only when the initial setting #1-5 is set to “0”.
7. Be sure to press the key after the key when changing the label
format.
Press:
1
2
NOTE: The scale will check the details of the date input. An invalid date will result in an
error.
1
8
9
4
Enter the new date.
(Ex. Dec. 18, 1994)
Day
Year
Month
PRT
*
DT/TM
0
FEED
C
PRT/*