Toshiba EO1-33030 Label Maker User Manual


 
2. PRINTER SETUP
EO1-33030
2.10 Program Download
2-14
2.10.2 Install Program
Installation (Cont.)
System Requirements
System
IBM Compatible PC running Windows 95®, Windows 98®, or Windows
2000®.
Installed memory of 16MB minimum (32MB or more recommended)
Available Hard Disk space of 10MB or more
Interface
Interface to the B-419 will be through an RS-232C interface.
More than one serial port should be provided on the PC.
Setup
Setup Disk
Make sure that you have all three diskettes available of the “Install
Program for B-419”. (Refer to the figure on the previous page.)
1.
While running Windows 95, Windows 98 or Windows 2000, insert
Setup Disk (1/3) into the PC floppy drive.
2.
Click on the
START
button then highlight
RUN
and click on
RUN
.
3.
When the RUN display appears, type in A:\SETUP.EXE and click
on
OK
.
4.
When the installation is ready, the initial screen of the installation
will automatically appear.
NOTE:
Windows 3.1® is not supported.
Windows 95®, Windows 98®,
Windows 2000®, and Windows
3.1® are registered trademarks
of the Microsoft Corporation.