Toshiba E-STUDIO237 Copier User Manual


 
Copying on Both Sides - DUPLEX - 93
4
Select the duplex copying mode, and then press the [ENTER] but-
ton or button.
1>2 DUPLEX: 1-sided original to 2-sided copy
2>2 DUPLEX: 2-sided original to 2-sided copy
5
Select the finishing mode, and then press the [ENTER] button.
BOOK TYPE: Open to left
TABLET TYPE: Open to top
The mode of duplex copying is set.
6
Select the other copy modes as required, and then press the
[START] button.
Copying starts.
7
Place the next original if you are using the original glass, select
“YES”, and then press the [ENTER] button. Repeat this procedure
until all the originals are scanned.
You can press the [START] button instead of selecting “YES”.
When all the originals have been scanned
Select “NO” and then press the [ENTER] button.
DUPLEX
1>2 DUPLEX
1>1 SIMPLEX
2>2 DUPLEX
DUPLEX
BOOK TYPE
TABLET TYPE
Next original?
YES
NO