Filter
Top Products
94 Network Operator’s Guide — TopAccess Errors
2B11 Job status failed. Retry the scan.
2B20 Failed to access file. Retry the scan.
2B30
Insufficient disk space. Delete unnecessary documents in e-Filing
and try again.
2B31
Failed to access Electronic Filing. Make sure that the specified e-Filing or
folder exists. (If not, this error would not
occur.) Delete the specified e-Filing or
folder and reset them. Retry the job in
error. If the specified e-Filing or folder
cannot be deleted, contact your service
representative.
2B32
Failed to print Electronic Filing
document.
Make sure that the specified document
exists. (If not, this error would not occur.)
Delete the specified document and reset
them. Retry the job in error. If the speci-
fied document cannot be deleted, contact
your service representative.
2B50
Failed to process image. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
2B51
Failed to process print image. Make sure that the Function List can be
printed out. Retry the print. If the error
still occurs, contact your service represen-
tative.
2B90
Insufficient Memory. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
2BA0
Invalid Box password specified. Make sure that the password is correct
and retry the scan, or reset the password
and retry the scan. When this error occurs
for the print of the data in the e-Filing,
perform the print with the administrator’s
password. If the recovery is still not com-
pleted or in case of invalid password for
the operation other printing (opening the
file, etc.), contact your service representa-
tive.
2BB0 Job canceled (Job was canceled.)
2BB1
Power failure occurred Make sure that the power cable is con-
nected properly and it is inserted securely.
Resend the job.
2BC0
System fatal error. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
2BC1
Failed to acquire resource. Turn the power OFF and then back ON.
Retry the scan. If the error still occurs,
contact your service representative.
Error Code Message Corrective Action