Filter
Top Products
3.THE INITIAL VALUES
Precautions on the Initial Values 15
3 THE INITIAL VALUES
Initial value list
[Administration] Tab
[Setup] Menu
[General] Sub Menu
* The value can be changed in the [ADMIN] tab in the [User Function] mode in the touch panel of the equipment.
[Network] Sub Menu
* The value can be changed in the [ADMIN] tab in the [User Function] mode in the touch panel of the equipment.
[Printer] Sub Menu
[Print Service] Sub Menu
Functions
Save as FTP Disable
Network iFax Disable
Network Fax Disable
Web Services Scan Disable
Twain Scanning Enable The initial value is the same as that of in the Normal
Security Mode; however, be sure to set to OFF.
Restriction on Address Book Operation by Administrator
Can be operated by Administrator only
Energy Save
Auto Clear * 45 Seconds The initial value is the same as in the Normal Security
Mode; however, OFF cannot be selected.
HTTP Network Service
Enable SSL* Enable
SMTP Client
Enable SSL Verify with imported CA
certification(s)
The secure setting is "Verify with imported CA
certification(s)" or "Accept all certificates without CA".
Authentication AUTO Be sure to confirm that one of "CRAM-MD5", "Digest-
MD5", "Kerberos" or "NTLM (IWA)" is applied to your use
environment.
SMTP Server
Enable SMTP Server Disable
POP3 Network Service
Enable SSL Verify with imported CA
certification(s)
FTP Client
Enable SSL Verify with imported CA
certification(s)
FTP Server
Enable SSL Enable
SNMP Network Service
Enable SNMP V1/V2 Disable
Enable SNMP V3 Enable
Web Services Setting
Enable SSL Enable
Web Services Scan Disable
General Setting
Restriction for Print Job Only Hold
IPP Print
Enable SSL Enable
FTP Print
Enable FTP Printing Disable