Filter
Top Products
© 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved GD-1220/1221
LSU-RELATED FUNCTIONS
2 - 7
2
[ 1 ] Discard printing
Func. 15 bit 2 permits selecting between ON and OFF of the option for discard extra.
Func. 15 bit 2 = 0 : OFF
Func. 15 bit 2 = 1 : ON (Default)
Func. 15 bits 6 and 7 allow the discard parameter to be set.
Func. 15 (Default Setting bit 2 = 0, bit 6 = 1, bit 7 = 0)
• When the option for discard extra is ON:
When the length of the received document in the feed direction exceeds the effective recording area
and the part exceeding one page is within the discard parameter, printing takes place with the
exceeding part discarded. When the length of the received document in the feed direction exceeds
the discard parameter range and is within the reduction range of the maximum reduce ratio, vertical
reduction print takes place. When it is not within the reduction range of the maximum reduce ratio,
divided print takes place. The discard extra takes preference over the vertical reduction print.
Fig. 2-2
If the length of B is less than the set discard parameter, B is discarded.
• When the option for discard extra is OFF:
The vertical reduction takes preference without performing discard extra print.
bit 2 bit 6 bit 7 Discard parameter
0 X X Discard OFF
1 0 0 0 mm (Discard OFF)
110 10 mm
101 17 mm
111 34 mm
Rcv. doc.
AA
A: Effective recording area
B: Record data length outside
effective recording area
B
Rcd. paper