Filter
Top Products
GD-1220/1221 © 2006 - 2008 TOSHIBA TEC CORPORATION All rights reserved
SPECIFICATIONS AND OUTLINE OF SYSTEM
1 - 2
1.2 Specifications
1) Main system
- Type
Desktop type transceiver
-Operation
Transmission Manual/Automatic
Reception Manual/Automatic
2) Scanner
<Scanning density> [ ]: at rotation transmission
- Horizontal direction
16 lines/mm, 8 lines/mm
[15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm]
- Vertical direction
15.4 lines/mm, 7.7 lines/mm, 3.85 lines/mm
[16 lines/mm, 8 lines/mm]
- Combination
U-Fine: 16 x 15.4 lines/mm [15.4 x 16 lines/mm]
Fine: 8 x 7.7 lines/mm [7.7 x 8 lines/mm]
Normal: 8 x 3.85 lines/mm [3.85 x 8 lines/mm]
- Effective scanning area
Standard mode
(For NAD model)
Horizontal scanning: Max. 280 mm (Ledger width)
Vertical scanning: Max. 432 mm (Ledger length)
(For MJD, AUD, ASD, SAD, TWD, and CND models)
Horizontal scanning: Max. 297 mm (A3 width)
Vertical scanning: Max. 420 mm (A3 length)
Long original mode
(For NAD model)
Horizontal scanning: Max. 280 mm (Ledger width)
Vertical scanning: Max. 1000 mm
(For MJD, AUD, ASD, SAD, TWD, and CND models)
Horizontal scanning: Max. 297 mm (A3 width)
Vertical scanning: Max. 1000 mm
Note: Note:
The maximum vertical scanning length is 700 mm when transmission is performed satisfying all
of the following conditions. The equipment is in the long original mode. Direct transmission is
performed. The original has the same width as of A3 or ledger. The receiving facsimile machine
is capable of receiving originals with A4 only.