Filter
Top Products
41
MOTION SETUP
The DVR unit allows the user to adjust several different Motion Settings and create motion detection regions.
Create a Motion Region
1. Select a camera channel
2. Place the mouse pointer at the upper left hand corner of the area to
designate, click and hold down the left mouse button, drag the
mouse. Let go of the button when the box is the size desired.
3. Create up to five Motion Regions per camera. Resize and move
them by dragging the sides and corners of the box.
4. Adjust the sensitivity of the motion area using the sensitivity slider.
5. Define the recording time for a motion event
Pre Alarm – 0 > 60 Seconds [The number of seconds the DVR
records before motion is detected]
Post Alarm (MOTION) – 0 > 60 Seconds [The number of seconds
the DVR records after motion is detected]
Schedule recording at a
regular specified interval
Display full screen video
pop up on motion event
Beep on motion event
Display full screen video
pop up on sensor event
Apply current settings
to all channels