Filter
Top Products
User’s Manual 4-5
L300/L300D series
Removing discs
To remove the CD/DVD/HD DVD, follow the steps below and refer to below
figure.
1. To pop the drawer partially open, press the eject button. Gently pull
the drawer out until it is fully opened.
2. The CD/DVD/HD DVD extends slightly over the sides of the drawer so
you can grasp it. Hold the CD/DVD/HD DVD gently and lift it out.
Figure 4-7 Removing a CD/DVD/HD DVD
3. Push the center of the drawer to close it. Press gently until it locks into
place.
Do not press the eject button while the computer is accessing the drive.
Wait for the optical disc drive indicator to go out before you open the
drawer. Also, if the CD/DVD/HD DVD is spinning when you open the
drawer, wait for it to stop before you remove it.
■ When the drawer pops open slightly, wait a moment to make sure the
CD/DVD/HD DVD has stopped spinning before pulling the drawer fully
open.
■ Turn off the power before you use the eject hole. If the CD/DVD/HD
DVD is spinning when you open the drawer, the CD/DVD/HD DVD
could fly off the spindle and cause injury.