Toshiba L450 Laptop User Manual


 
User’s Manual 4-5
L450/L450D
How to remove a CD/DVD when the disc tray will not open
Pressing the eject button will not open the disc tray when the computer is
turned off although, in these circumstances, you can open the tray by
inserting a slender object such as a straightened paper clip about 15mm
into the eject hole just to the right of the drive’s eject button.
Figure 4-6 Manual release with the eject hole
Writing CD/DVD on DVD Super Multi drive
You can use the DVD Super Multi drive to write data to either CD-R,
CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double
Layer), DVD+RW, DVD-RAM, or DVD-R (Dual Layer) discs.
TOSHIBA Disc Creator can be used to write data.
21 3
1. Disc tray LED
2. Eject button
3. Eject hole
You must ensure that you turn off the power before you use the eject hole.
If the CD/DVD media is spinning when you open the disc tray, it may fly off
of the spindle and cause injury.
The optical drive installed on this computer cannot write multiple sessions
on DVD-R Dual Layer disc sessions. Once a disc has been written to once,
it will be finalized. Once finalized, no further writing to the disc will be
possible regardless of what portion of the total disc capacity was used.
Please refer to the section Writable discs, Chapter 2 for details about
the types of writable CD and DVD discs that can be supported by this
computer.
Do not turn off the power to the optical disc drive while the computer is
accessing it as this may cause you to lose data.
CD-R/RW media cannot be accessed using the Create CD/DVD option
in Media Center.
To write data to CD-R/-RW media, use the TOSHIBA Disc Creator
feature that is installed on your computer.