Filter
Top Products
User’s Manual 4-11
L630/L635
4. Press gently at the center of the CD/DVD/BD until you feel it click into
place. The CD/DVD/BD should lie below the top of the spindle, flush
with the spindle base.
5. Push the center of the drawer to close it. Press gently until it locks into
place.
Figure 4-8 Closing the drawer
Removing Discs
To remove the CD/DVD/BD, follow the steps below and refer to below
figure.
■ Do not touch the laser lens. Doing so could cause misalignment.
■ Do not keep foreign matter from entering the drive. Check the back
edge of the tray to make sure it carries no debris before closing the
drive.
If the CD/DVD/BD is not seated properly when the drawer is closed, the
CD/DVD/BD might be damaged. Also, the drawer might not open fully
when you press the eject button.
Do not press the eject button while the computer is accessing the drive.
Wait for the optical disc drive indicator to go out before you open the
drawer. Also, if the CD/DVD/BD is spinning when you open the drawer,
wait for it to stop before you remove it.