Filter
Top Products
4.11 Thermal module 4 Replacement Procedures
Satellite/Satellite Pro/L630/L635 Maintenance Manual 4--33
Installing the thermal Module
Install the thermal Module according to the following procedures and Figures 4-17, 4-18.
CAUTION: When installing the cooling module, keep the following in mind:
1. Be sure to confirm the correct position for the module.
2. Secure the relevant screws on the main board according to the number sequence
sealed on the heat sink module.
NOTE: Apply silicon grease with a special syringe to cover the surface of the CPU chip
completely.
1. If silicon grease is already applied to the CPU, wipe it off with a cloth.
By using a special syringe, apply silicon grease G7762 to the CPU chip center so that
the entire CPU chip is covered with the grease G7762.
2. Install the CPU cooling module into the correct position on the system board.
3. Securing CPU cooling module with it’s own screws.
4. Place the thermal module in the correct position and secure it with seven screws on
the thermal module.
5. Connect the fan cable to CN4300 on the system board.