Filter
Top Products
4 Replacement Procedures 4.17 CCD board and MIC
4.15 CCD Board and MIC
Removing the CCD Board and MIC
Remove the CCD board and MIC according to the following procedures and Figure 4-26.
1. Remove the CCD and MIC module from display rear cover.
CCD and MIC module
Figure 4-26 Removing the CCD board and MIC
2. Lift the CCD and MIC module from the display rear cover.
Installing the CCD Board and MIC
Install the FL inverter board according to the following procedures and Figure 4-26.
1. Seat the CCD and MIC module in the correct position.
4--42 Satellite/Satellite Pro/L630/L635 Maintenance Manual