Filter
Top Products
User’s Manual 8-15
L630/L635
Bluetooth
For more information on wireless communication, refer to Chapter 4,
Operating Basics.
Recovery Media
Problem Procedure
Cannot access
Bluetooth device
Make sure the computer’s wireless
communication switch is set to on.
Make sure the Bluetooth Manager is running and
the power to the Bluetooth device is turned on.
Make sure no optional Bluetooth Adpater is
installed in the computer. The built-in Bluetooth
function and an optional Bluetooth Adpater
cannot operate simultaneously.
If problems persist, contact your dealer.
Problem Procedure
The following
message appears
when executing
Recovery Media
Creator.
[The Recovery
Media Creator
can not be
launched because
there is no
recovery
partition.]
You will see this message if you have previously
chosen to remove the partition and are trying to
create Recovery Media. When there is no
recovery partition, the Recovery Media Creator
cannot make Recovery Media.
However, if you have already created a
“Recovery Media”, you can use it to restore the
recovery partition.
Simply follow the instructions in “Restoring the
preinstall software from your creating Recovery
Media” section in this manual. You will be
directed to select Restore Original Factory Image
from the drop-down menu. If you have not
created Recovery Media, please contact
TOSHIBA support for assistance.