Filter
Top Products
User’s Manual 4-9
Operating Basics
Using optical disc drives
The full-size drive provides high-performance execution of CD/DVD/BD
based programs. You can run either 12 cm (4.72") or 8 cm (3.15")
CD/DVD/BDs without an adaptor. A Serial ATA interface controller is used
for CD/DVD/BD operation. When the computer is accessing a CD/DVD/BD,
an indicator on the drive glows.
If you have a DVD SuperMulti drive, BD Writer drive or BD Combo drive,
refer also to the Writing CD/DVD/BDs on DVD Super Multi drives, BD
Writer drives or BD Combo drives section for precautions on writing to
CDs/DVDs/BDs.
Loading discs
To load CDs/DVDs/BDs, follow the steps as detailed below:
1. When the computer’s power is on, press the eject button to open the
disc tray slightly.
2. Grasp the disc tray gently and pull until it is fully opened.
Pressing the eject button and pulling the disc tray open
3. Lay the CD/DVD/BD, label side up, in the disc tray.
Use the DVD playback application to view DVD-Video discs.
1. Disc tray 2. Eject button
1
2