Filter
Top Products
User’s Manual 7-4
HW Setup
Boot Speed
This feature allows you to select system boot-up speed.
Panel Open - Power On
This feature allows you to change the Panel Open - Power On setting.
Keyboard
Wake-up on Keyboard
When this feature is enabled, and the computer is in Sleep Mode, you can
turn on the system by pressing any key. However, please be aware that this
option will only work with the internal keyboard and only when the computer
is in Sleep Mode.
LAN
Wake-up on LAN
This feature lets the computer's power be turned on from shutdown when it
receives a wake-up packet (Magic packet) from the LAN.
If a Supervisor Password has been set, manual boot device selection
functions may be restricted.
The boot device selection methods described above will not change the
boot priority settings that have been configured in HW Setup. In addition, if
you press a key other than one of those listed, or if the selected device is
not installed, the system will continue to boot according to the current and
available settings in HW Setup.
Fast Reduces system boot-up time. System can boot only
from the built-in HDD and only internal LCD and
keyboard are supported during the boot process.
Normal System boots up at normal speed. (Default)
Enabled Enables the Panel Open - Power On function. When
you open the display panel while your computer is
turned off, the system will boot up automatically.
Disabled Disables the Panel Open - Power On function.
(Default)
The Panle Open - Power On feature is supported with some models.
Enabled Enables the Wake-up on Keyboard function.
Disabled Disables the Wake-up on Keyboard function (Default).
Do not install or remove a memory module while Wake-up on LAN is
enabled.