Filter
Top Products
User's Manual
8-10
OPTIONAL DEVICES
USB FDD kit
The 3 1/2" external diskette drive module can be connected to the USB port. For
details on connecting the 3 1/2" external diskette drive module, refer to Chapter 4,
Operating Basics.
External monitor
An external analog monitor can be connected to the external monitor port on the
computer. The computer supports VGA and Super VGA video modes. To connect a
monitor, follow the steps below.
1. Turn the computer off.
2. Connect the monitor to the external monitor port.
3. Turn the monitor’s power on.
4. Turn the computer on.
When you turn on the power, the computer automatically recognizes the monitor
and determines whether it is color or monochrome.
To change the display settings, press Fn + F5. If you disconnect the monitor
before you turn the computer off, be sure to press Fn + F5 to switch to the internal
display. Refer to Chapter 5, The Keyboard, for details on using hot keys to change
the display setting.
TV
You can connect a television set to the S-Video out port on the computer. Follow
the steps below.
Connecting a TV
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the TV adaptor cable’s mini-jack
to the TV out port on the computer.
3. Connect the TV adaptor cable’s S-Video jack to the S-Video jack on the TV.
4. Turn the television on.
5. Turn the computer on.
You can use the hotkeys Fn + F5 to change the display device. Refer to Chapter 5,
The Keyboard.