Filter
Top Products
4 Replacement Procedures
4-20 [CONFIDENTIAL] SatelliteM500/M500D Maintenance Manual
Installing the HDD
To install the HDD, follow the steps below and refer to Figure 4-3 to 4-6.
CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may
damage the HDD.
1. Seat the HDD in the HDD Holder and secure the following screws.
M23L FLAT HEAD screw 4
2. Install the HDD connector.
3. Put the HDD into its slot and connect the HDD to the connector.
4. Secure them with the following screws.
M34L FLAT HEAD screw 4
CAUTION: Do not apply pressure to the center of the HDD pack. It may damage
the HDD pack. Hold the HDD pack by its corners.
5. Set the HDD cover and secure it with the screw (with an e-ring).