Filter
Top Products
82
Getting Started
Using external display devices
2 While holding down Fn, press F5 repeatedly until the setting
you want takes effect. Briefly pause each time you press the
F5
key to allow time for the display to change.
This hot key cycles through the settings in the following order
(the last two options are available if an external monitor is
connected):
❖ Built-in display only
❖ Built-in display and external monitor (simultaneously)
❖ External monitor only
❖ Built-in display and TV (or other external video device)
❖ TV (or other external video device)
❖ External monitor and TV
❖ Built-in display and external monitor (extended mode)
❖ Built-in display and TV (extended mode)
❖ External monitor and TV (extended mode)
❖ Swap-Switch primary display between internal display
and external monitor when using extended desktop
(Sample Image) Display options window
3 Release the
Fn key.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or other
video display device), you may need to adjust the video settings.
See the video device documentation for additional configuration
steps.