Filter
Top Products
Downloaded from Projector.com
© 3M 1997 3M
™
Multimedia Projector MP8640
2.4 Remote Control Transmitter Identification
STICK SWITCH
If Menu is on screen, stick switch
controls movement within menu.
If Menu is not displayed, stick switch
is used for mouse emulation, i.e. left
mouse button and cursor movement.
RESET / RIGHT button
If Menu is on screen, button resets
menu to factory default settings.
If Menu is not displayed, button is used
for mouse emulation, i.e. right mouse
button.
MENU ON / OFF button
Displays or removes the on-screen
menus.
FOCUS button
Adjusts focus.
VOLUME button
Adjusts volume.
MUTE button
Disables sound.
STANDBY / ON button
Power ON/OFF button.
OFF sets the unit in standby mode.
ZOOM button
Adjusts picture size.
TIMER ON / OFF button
Displays or removes TIMER.
When the blank screen is displayed,
TIMER can not be displayed.
BLANK ON / OFF button
Blanks the screen. Pull down or left on
stick switch to reveal screen.
POSITION button
Hold this button and move stick switch
to adjust vertical and horizontal image
position.
INPUT SELECT buttons
Selects the input source.
1. Remove the battery
compartment cover.
Slide the battery compartment
cover in the direction of the
arrow while pressing slightly
down on it.
2. Insert the batteries as
illustrated inside the
battery compartment.
3. Replace the cover.
9
How to insert batteries:
Insert the provided batteries (AA or R6P) into the remote control transmitter.