Filter
Top Products
Downloaded from Projector.com
3M
™
Multimedia Projector MP8640 © 3M 1997
3.3 Turn Off the Power
1
2
1
3
1 Hold the STANDBY/ON button for 3-5 seconds.
• The ON indicator blinks orange and the lamp turns off.
After approximately 1 minute, the fan stops and the indicator stays orange.
2 Turn the MAIN POWER switch of the projector off.
Caution: Do not turn off the MAIN POWER switch before pressing the STANDBY/ON button.
After the STANDBY/ON button is pressed, the fan rotates for about 1 minute to cool the
projector.
3 Close the lens shutter.
• Push up on the lens cover switch to close.
4 Disconnect cables.
12