Toshiba R400 Personal Computer User Manual


 
User’s Manual 6-17
Power and Power-Up Modes
Tablet mode
Enter your password by tapping the on-screen keyboard using the Tablet
PC Pen.
Figure 6-5 On-screen keyboard
The beep sounds when tapping the on-screen keyboard with the Tablet
PC Pen. An * (asterisk) is displayed after “Password =” and one
character is input for every tapping.
Power-up modes
The computer has three different power-up modes as follows:
Boot Mode: The computer will shut down without saving data - in view
of this you must always save your work before you turn the computer
off.
Hibernation Mode: Data in memory will be saved to the hard disk drive.
Sleep Mode: Data will be maintained in the computer’s memory.
Windows utilities
You can configure various settings associated with both Sleep Mode and
Hibernation Mode within the Power Options (to access it, Start -> Control
Panel -> System and Maintenance -> Power Options).
Hot keys
You can use the Fn + F3 hot key to enter Sleep Mode or Fn + F4 to enter
Hibernation Mode - please refer to Chapter 5, The Keyboard for further
details.
Register your password to the computer in the Laptop mode using the
standard keyboard. Refer to TOSHIBA Password Utility, in this chapter for
details.
Please refer to the sections Turning on the power and Turning off the
power in Chapter 1, Getting Started for further information.