Toshiba Pro L500D Laptop User Manual


 
User’s Manual 8-2
Optional Devices
Other
Security lock
PC Card
The computer is equipped with a single PC Card slot into which any Type II
PC Card/ CardBus device that meets industry standards, either
manufactured by TOSHIBA or another vendor, can be installed. The slot
supports hot plug connection and utilizes the PCI interface that supports
the reading and writing of data at a theoretical maximum rate of 132 Mbps.
Inserting a PC Card
The Windows hot-install feature allows you to insert PC Cards while the
computer is turned on.
To insert a PC Card, follow the steps as detailed below:
1. Press the PC Card eject button to partially extend it out of the computer.
2. Press the extended PC Card eject button in order to eject the Dummy
card partially out of the computer.
3. Grasp the Dummy card and draw it.
4. Insert the PC Card into the PC Card slot on the side of the computer.
5. Press the PC Card gently to ensure a firm connection is made.
Figure 8-1 Inserting the PC Card
6. After inserting the PC Card you should refer to its documentation and
also check the configuration in Windows in order to ensure that it is
correct.
Do not insert a PC Card while the computer is in Sleep Mode or
Hibernation Mode as you may find that some cards do not work
properly.