Filter
Top Products
User’s Manual 7-5
HW Setup
The following settings can be changed when the Built-in LAN is Enabled.
Connect the AC adaptor when using the Wake-up on LAN function. The
battery retention time will be shorter than the times listed in this manual
when this function is enabled. Refer to the section Battery exhausted time
in chapter 6.
Built-in LAN
This feature enables or disables the Built-in LAN.
USB
Legacy USB Support
Use this option to enable or disable USB Legacy Emulation. If your
operating system does not support USB, you can still use a USB mouse
and keyboard by setting the Legacy USB Support item to enabled.
SATA
SATA Interface setting
This feature allows you to set SATA interface setting.
Enabled Enables Wake-up on LAN from shutdown.
Disabled Disables Wake-up on LAN from shutdown
(Default).
Enabled Enables Built-in LAN functions (Default).
Disabled Disables Built-in LAN functions.
Enabled Enables the USB Legacy Emulation (Default).
Disabled Disables the USB Legacy Emulation.
Performance Let HDD/SSD work with maximum performance
(Default).
Battery life Let HDD/SSD work with battery life mode. If this
setting is selected, this caused performance
down.