Filter
Top Products
4.6 ODD Bay Module 4 Replacement Procedures
Disassembling the ODD Drive
NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or
replace the ODD drive only if it fails.
Disassemble the ODD drive according to the following procedures and Figure 4-18.
1. Remove two M2x3 white flat-head screws.
2. Remove the bracket.
Figure 4-18 Removing the bracket from the ODD drive
Assembling the ODD Drive
Assemble the ODD drive according to the following procedures and Figure 4-18.
1. Seat the bracket and secure it two M2x3 white flat-head screws.
Satellite A100/A105 / TECRA A7
Maintenance Manual 4-33