Filter
Top Products
132
Exploring Your Computer’s Features
Setting up for communications
Before you can communicate using the modem, you need to
connect it to a telephone line. Your computer’s built-in modem port
provides an RJ-11 jack, allowing you to connect the modem to a
standard voice-grade telephone line.
1 Plug one end of a telephone cable (purchased separately) into
the modem port on the side of the computer.
(Sample Illustration) Connecting the telephone cable to the modem
port
2 Connect the other end to the RJ-11 wall jack.
(Sample Illustration) Connecting to a wall jack
Connect the built-in modem only to ordinary analog phone lines.
Never connect the built-in modem to a digital line (ISDN).
Never connect the built-in modem to the digital connector on a
public telephone or to a digital private branch exchange (PBX).
Never connect the built-in modem to a key telephone system for
residences or offices.
Connection to any communication line other than an analog phone
line could cause a computer system failure.
Now you are ready to send a fax or use the modem to connect to an
online service or the Internet.
NOTE