Filter
Top Products
2. Plug one end of the cable into the LAN jack. Press gently until you
hear the latch click into place.
Figure 3-8 Connecting the LAN cable (R940)
1
2
1. LAN jack 2. LAN cable
3. Plug the other end of the cable into a LAN hub connector or router.
Check with your LAN administrator and hardware or software vendor
before using or configuring a network connection.
Optional devices
Optional devices can expand the computer's capabilities and its versatility.
This section describes the connection or installation of the following
devices:
Cards/memory
ExpressCard (ExpressCard/34 or ExpressCard/54)
Smart Card
Memory media
Additional memory module
Peripheral devices
External monitor
HDMI device
DisplayPort
eSATA device
TOSHIBA Hi-Speed Port Replicator II
Other
Security lock
Optional TOSHIBA accessories
ExpressCard
Some models are equipped with a single ExpressCard slot into which any
ExpressCard device that meets industry standards, either manufactured by
TOSHIBA or another vendor, can be installed. The slot supports hot plug
User's Manual
3-30