Filter
Top Products
30 ASC25 Instruction Manual
(3) List of optics-related parts
Name Model, Rating Use
Optical fiber cable
(Standard optical fiber
cable)
2001H-MMnn/¨¨¨¨
2-C-LAP 2XCCV-HC-20/07
(Main line cable)
(¨¨ denotes cable total length.)
(nn denotes exposed cord length.)
2001H-M-¨¨¨¨ DCV-HC-
20/07
(Cord with connector on one end)
(¨¨ denotes cord length.)
Optical fiber cable with
optical connector
(Standard optical fiber
cord)
2001H-MM-¨¨¨¨ DCV-HC-
20/07
(Cord with connector on both ends)
(¨¨ denotes cord length.)
Aligner (In-line adapter) IAT-4000 (Connection of optical connectors)
Table 9.3
9.4 Precautions on handling optical fiber and optical connector
Since optical fibers are finely finished parts and are made of glass, handling of them shall
be done with special care emphasizing the following.
(1) Do not damage and contaminate the edge faces of optical connector. Damage
or attached dust on the edge of optical connector increase the connection loss.
If the edge of optical connector is contaminated, remove the contaminants from
the edge.
Key to prevent insertion error
Edge
Figure 9.8 Edge position of F07 Type connector