Filter
Top Products
3 Tests and Diagnostics 3.5 Heatrun Test
3-20 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
3.5 Heatrun Test
To execute this program, select 3-Repair heatrun in the startup menu, press Enter.
When selecting the option you want to execute, the message shown below will appear and
01-ROM Checksum of the SYSTEM test will be executed.
SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX
[Ctrl]+[Break] : test end
[Ctrl]+[C] : key stop
SUB-TEST : XX
PASS COUNT : XXXXX ERROR COUNT : XXXXX
WRITE DATA : XX READ DATA : XX
ADDRESS : XXXXXX STATUS : XXX
After selecting this test, the same subtests as 3.24 Running Test are executed successively.
For more details on the procedure and test content, refer to Running Test.
When the heatrun test ends, following message appears in the display.
************************************************
HEATRUN TEST END
************************************************
Press any key to continue...
Press any key and return to the startup menu.
NOTE: The test result (Errorlog.txt) is stored in the floppy disk. The result is displayed
in the same format as Log Utilities. For more details of the format, refer to 3.23
Log Utilities.