Filter
Top Products
4.2 Battery pack 4 Replacement Procedures
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-9
Installing the Battery pack
To install the battery pack, follow the steps below and refer to Figure 4-1.
CAUTION: The battery pack is a lithium ion battery, which can explode if not properly
replaced, used, handled or disposed of. For environmental reasons, collect
the spent battery packs. Use only batteries recommended by Toshiba as
replacements.
NOTE: Check the battery’s terminals visually. If they are dirty, wipe them clean with a
dry cloth.
1. Turn off the power of the computer.
2. Disconnect the AC adapter and all other external devices to the computer.
3. Insert the battery pack all the way to the end.
4. Make sure that the battery pack is securely in place and the battery lock is in the lock
position.