1.2 System Unit 1 Hardware Overview
• – Contain two 512-byte buffer to maximize the transfer speed
• – Support Traffic LED Light
• – Support Over Current Protection
ENE CB1410 Card Bus Host Adapter
• Cardbus Controller Datasheet
• 3.3V operation with 5V tolerance
• 208-pin LQFP package or 209-ball LFBGA for CB1420 dual slot Cardbus
controller
• 144-pin LQFP or 144-ball LFBGA package for CB1410 single slot Cardbus
controller
• Compliant with
• PCI Local Bus Specification, Revision 2.2
• PCI Bus Power Management Interface Specification, Revision 1.1
• PCI Mobile Design Guide, Version 1.1
• Advanced Configuration and Power Interface Specification, Revision 1.0
• PC 99 System Design Guide
• PC Card Standard 8.0
• Interrupt configuration
• Supports parallel PCI interrupts
• Supports parallel IRQ and parallel PCI interrupts
• Supports serialized IRQ and parallel PCI interrupts
• Supports serialized IRQ and PCI interrupts
• Power Management Control Logic
• Supports CLKRUN# protocol
• Supports SUSPEND#
• Supports PCI PME# from D3, D2, D1 and D0
• Supports PCI PME# from D3Cold
• Supports D3STATE# (CB1410 only)
• Power Switch Interface
• CB1420 supports serial 3 wire power switch interface.
• CB1410 supports parallel 4 wire power switch interface.
• Misc Control Logic
Satellite M30X Series Maintenance Manual 1-9