Filter
Top Products
4 Replacement Procedures
Installing the Display Assembly
To install the display assembly, follow the steps below and refer to the figures in the preceding
section.
1. Seat the display assembly taking care not to crush to the LCD display cable, the LCD power
cable, or wireless LAN antenna.
2. Secure two M2.5x8 black screws to each hinge and two black M2.5x8 black screws to the
computer’s back side (which help hold the display assembly in place).
3. Feed the wireless LAN module’s antennae wires through the small hole beside the LCD
display cable connector.
4. Connect the LCD power cable to the top chassis.
5. Reinstall the keyboard and wireless LAN module.
Satellite M40X Series Maintenance Manual [CONFIDENTIAL] 4-29