Toshiba satellite NB10-A/NB10t-A Laptop User Manual


 
9. Seat the memory module cover in place and secure it with the screw.
Take care to ensure that the memory module cover is firmly closed.
Figure 4-5 Seating the memory module cover
2
1
1. Memory module cover 2. Screw
Product appearance depends on the model you purchased.
10. Turn the computer over.
11. Connect the AC adaptor and turn the computer on.
Installing a memory module
To install a memory module, follow the steps as detailed below:
1. Click Power in the Settings charm, and then select Restart.
2. Hold down the F2 key and then release this key one second after the
computer is power on - the BIOS setup utility will load.
In the BIOS setup screen, select Exit -> Disable Built-in Battery,
and Power Off.
3. Remove the AC adaptor and all cables and peripherals connected to
the computer.
4. Close the display panel and turn the computer upside down.
5. Loosen the screw securing the memory module cover in place.
6. Slide your fingernail or a thin object under the cover and lift it off.
User's Manual
4-13