Filter
Top Products
10. SPECIFICATIONS
EO1-12031
10.2 Options
10- 3
10.2 Options
Option name Model Description
DRWST-51A-4MVK-QM-R
DRWST-51A-8MVK-QM-R
24V-drive standard drawer
(with screw holes on the left and the rear for installing the
POLST-51)
Dimensions and Weight:
460(W) x 400(D) x 115(H) mm, 10 Kg
Money Case Type: MC4,8
Type Bill holder Coin tray Mini coin case CDC Remarks
4MVK-QM 5 5 No Yes With media slot
Drawer unit
Drawer type
8MVK-QM 4 6 1 Yes With media slot
TFTST-71-2A-QM-R
12.1-inch TFT color display to be installed onto the POS
terminal
2nd display unit
TFTST-71-5A-QM-R
15.1-inch TFT color display to be installed onto the POS
terminal
LVDS board KIT-71-DSP1-QM-R Used to connect a TFTST-71 optional 2nd display unit.
Line indicator unit
(LIU)
LIUST-71-BAAK-QM-R
20 characters x 2 lines dot display to be installed onto the
POS terminal
Pole unit KIT-71-POLE-QM-R
Pole and extension cable for attaching an LIUST-71 optional
line indicator unit at the level of 235 mm from the standard
position
LIU stand KIT-71-BASE-QM-R
A stand for installing an LIUST-71 optional line indicator unit
onto the POS terminal
TRST-56-P-1K-QM-R
Parallel interface single thermal printer for 80 mm wide paper
Cabinet color: Cool Black
Printer unit
TRST-56-S-1K-QM-R
Serial interface single thermal printer for 80 mm wide paper
Cabinet color: Cool Black
PCMCIA/CF
interface board
MIFST-71-2-QM
PC card/CF card interface kit
This kit conforms to the 32-bit CardBus (Card-32) card and
the 16-bit PC card (Card-16).
A slot is provided on the board, which supports up to
PCMCIA Type II or CF card TYPE II.
COM5 and COM6
connectors
KIT-71-COM-QM-R COM5 or COM6 connector and cable kit
Magnetic card
reader (MCR)
MCRST-71-3-QM-R ISO Track 1 and 2 type magnetic card reader kit
iButton KIT-71-BTN1-QM-R
iButton unit to be installed onto the POS terminal
(An iButton key is not included.)
Relay PC board KIT-71-RELY-QM-R Used to control an optional MCR unit or iButton unit.
NOTE:
Model names that end with "-R" are RoHS compliant models. If "-R" is not attached, that model is non RoHS
compliant.
Never install non RoHS compliant optional equipment or parts on a RoHS compliant machine which is supposed
to be used in the countries that enforce the RoHS directive, as doing this is legally prohibited.