Filter
Top Products
36
Using the menus (continued)
Default setting menu
Note
•Set Fan mode to [High] when the altitude is 600m (2,000 ft.) or higher, however, do not
set Fan mode to [High] when using the projector at a lower altitude.
• Note that if [Power on] is set to [Auto], then if the power is supplied when restored after
a power outage, the projector will come on.
Item Description RGB Y/PB/PR Video USB
Projection mode
Sets projection mode in accordance with
Placement Styles.
(Standard) (Rear)
Yes Yes Yes Yes
Language
Select one of the languages below for the menu
and messages.
[ : Enter setting mode] J[
:Selection]J
[ : Apply]
Yes Yes Yes Yes
Start-up screen
Display start-up screen when power is turned on.
On
Off
Yes Yes Yes Yes
Auto input search
Set whether the input with signals is only
selected or not.
On
Off
Yes Yes Yes Yes
Fan mode
[Note]
Sets the cooling fan speed.
Standard
High
Yes Yes Yes Yes
Lamp power
Sets the lamp power.
Normal Low
Yes Yes Yes Yes
Power on
[Note]
Sets whether to turn on the power when the ON/
STANDBY button is pressed (Manual), or when
the power is supplied (Auto).
Manual
Auto
Yes Yes Yes Yes
Reset all
Press . (The language is not reset.)
Resets all adjustments and settings to their
factory settings.
Yes
No
Yes Yes Yes Yes
p.24
English/ Français/ Deutsch/ Italiano/ Español/
Português/ Ɋɭɫɫɤɢɣ/ Svenska/ Türkçe/ Polski/
Dansk/ ýeština/ Magyar/ Nederlands/ Suomi/
Norsk/ ǼȜȜȘȞȚțȐ/ Română/ ᣣᧄݶ/ Ђ᭜ㅕԨ
ᄬ/ ϛМ)ᖅᡝԅ*/ Bahasa Indonesia